Quantcast

[PATCH] Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[PATCH] Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.

Jon Loeliger
From: Ed Swarthout <[hidden email]>

All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c.  In a subsequent patch, this will be
utilized by the 85xx ports as well.

Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.

Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.

Signed-off-by: Ed Swarthout <[hidden email]>
Signed-off-by: Zhang Wei <[hidden email]>
Signed-off-by: Jon Loeliger <[hidden email]>
---

Wolfgang,

Please apply this to the testing repository as it depends on
my previous PCI/PCI-E changes already applied there.  I have
built and tested this on the 8641 from u-boot-testing.

Thanks,
jdl


 board/mpc8641hpcn/mpc8641hpcn.c |  161 ++++++++++++++++++++++++-------
 board/mpc8641hpcn/u-boot.lds    |    1 -
 cpu/mpc86xx/Makefile            |    3 +-
 cpu/mpc86xx/pci.c               |  146 ----------------------------
 cpu/mpc86xx/pcie_indirect.c     |  199 ---------------------------------------
 drivers/Makefile                |    2 +-
 drivers/fsl_pci_init.c          |  176 ++++++++++++++++++++++++++++++++++
 include/asm-ppc/immap_fsl_pci.h |  150 +++++++++++++++++++++++++++++
 include/configs/MPC8641HPCN.h   |   41 +++++----
 include/pci.h                   |    6 +
 10 files changed, 482 insertions(+), 403 deletions(-)
 delete mode 100644 cpu/mpc86xx/pci.c
 delete mode 100644 cpu/mpc86xx/pcie_indirect.c
 create mode 100644 drivers/fsl_pci_init.c
 create mode 100644 include/asm-ppc/immap_fsl_pci.h

diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
index 7d7e2af..d8a4b1f 100644
--- a/board/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/mpc8641hpcn/mpc8641hpcn.c
@@ -11,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -24,6 +24,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <asm/io.h>
 
@@ -55,35 +56,6 @@ int checkboard(void)
 {
  puts("Board: MPC8641HPCN\n");
 
-#ifdef CONFIG_PCI
-
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_pex_t *pex1 = &immap->im_pex1;
-
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-
- if ((io_sel == 2 || io_sel == 3 || io_sel == 5
-     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
-    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
- debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
- debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
- if (pex1->pme_msg_det) {
- pex1->pme_msg_det = 0xffffffff;
- debug(" with errors.  Clearing.  Now 0x%08x",
-      pex1->pme_msg_det);
- }
- debug("\n");
- } else {
- puts("PCI-EXPRESS 1: Disabled\n");
- }
-
-#else
- puts("PCI-EXPRESS1: Disabled\n");
-#endif
 
  return 0;
 }
@@ -219,21 +191,136 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = {
 #endif
 
 
-static struct pci_controller hose = {
+static struct pci_controller pci1_hose = {
 #ifndef CONFIG_PCI_PNP
-      config_table:pci_mpc86xxcts_config_table,
+ config_table:pci_mpc86xxcts_config_table
 #endif
 };
-
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif /* CONFIG_PCI2 */
+
+int first_free_busno = 0;
+
+
 void pci_init_board(void)
 {
-#ifdef CONFIG_PCI
- extern void pci_mpc86xx_init(struct pci_controller *hose);
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+ uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
+
+ if ((io_sel == 2 || io_sel == 3 || io_sel == 5
+     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
+    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
+ debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug(" with errors.  Clearing.  Now 0x%08x",
+      pci->pme_msg_det);
+ }
+ debug("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+       CFG_PCI_MEMORY_BUS,
+       CFG_PCI_MEMORY_PHYS,
+       CFG_PCI_MEMORY_SIZE,
+       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+       CFG_PCI1_MEM_BASE,
+       CFG_PCI1_MEM_PHYS,
+       CFG_PCI1_MEM_SIZE,
+       PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+       CFG_PCI1_IO_BASE,
+       CFG_PCI1_IO_PHYS,
+       CFG_PCI1_IO_SIZE,
+       PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf ("    PCI-EXPRESS 1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ /*
+ * Activate ULI1575 legacy chip by performing a fake
+ * memory access.  Needed to make ULI RTC work.
+ */
+ in_be32(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE - 0x1000000);
+
+ } else {
+ puts("PCI-EXPRESS 1: Disabled\n");
+ }
+}
+#else
+ puts("PCI-EXPRESS1: Disabled\n");
+#endif /* CONFIG_PCI1 */
+
+#ifdef CONFIG_PCI2
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci2_hose;
+
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+       CFG_PCI_MEMORY_BUS,
+       CFG_PCI_MEMORY_PHYS,
+       CFG_PCI_MEMORY_SIZE,
+       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+       CFG_PCI2_MEM_BASE,
+       CFG_PCI2_MEM_PHYS,
+       CFG_PCI2_MEM_SIZE,
+       PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+       CFG_PCI2_IO_BASE,
+       CFG_PCI2_IO_PHYS,
+       CFG_PCI2_IO_SIZE,
+       PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf ("    PCI-EXPRESS 2 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+}
+#else
+ puts("PCI-EXPRESS 2: Disabled\n");
+#endif /* CONFIG_PCI2 */
 
- pci_mpc86xx_init(&hose);
-#endif /* CONFIG_PCI */
 }
 
 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
index 34b50e4..e4792ef 100644
--- a/board/mpc8641hpcn/u-boot.lds
+++ b/board/mpc8641hpcn/u-boot.lds
@@ -57,7 +57,6 @@ SECTIONS
     cpu/mpc86xx/cpu_init.o (.text)
     cpu/mpc86xx/cpu.o (.text)
     cpu/mpc86xx/speed.o (.text)
-    cpu/mpc86xx/pci.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
     lib_ppc/extable.o (.text)
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index fffcfd2..6d9300e 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -1,4 +1,5 @@
 #
+# Copyright 2007 Freescale Semiconductor, Inc.
 # (C) Copyright 2002,2003 Motorola Inc.
 # Xianghua Xiao,[hidden email]
 #
@@ -30,7 +31,7 @@ LIB = $(obj)lib$(CPU).a
 START = start.o #resetvec.o
 SOBJS = cache.o
 COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
-  pci.o pcie_indirect.o spd_sdram.o
+  spd_sdram.o
 
 SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc86xx/pci.c b/cpu/mpc86xx/pci.c
deleted file mode 100644
index b86548d..0000000
--- a/cpu/mpc86xx/pci.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor,Inc.
- * 2005, 2006. All rights reserved.
- *
- * Ed Swarthout ([hidden email])
- * Jason Jin ([hidden email])
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCIE Configuration space access support for PCIE Bridge
- */
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_PCI)
-void
-pci_mpc86xx_init(struct pci_controller *hose)
-{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_pex_t *pcie1 = &immap->im_pex1;
- u16 temp16;
- u32 temp32;
-
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pcie1_host = (host1_agent == 2) || (host1_agent == 3);
- uint pcie1_agent = (host1_agent == 0) || (host1_agent == 1);
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
-
- if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 ||
-     io_sel == 7 || io_sel == 0xf)
-    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
- printf("PCI-EXPRESS 1: Configured as %s \n",
-       pcie1_agent ? "Agent" : "Host");
- if (pcie1_agent)
- return; /*Don't scan bus when configured as agent */
- printf("               Scanning PCIE bus");
- debug("0x%08x=0x%08x ",
-      &pcie1->pme_msg_det,
-      pcie1->pme_msg_det);
- if (pcie1->pme_msg_det) {
- pcie1->pme_msg_det = 0xffffffff;
- debug(" with errors.  Clearing.  Now 0x%08x",
-      pcie1->pme_msg_det);
- }
- debug("\n");
- } else {
- printf("PCI-EXPRESS 1 disabled!\n");
- return;
- }
-
- /*
- * Set first_bus=0 only skipped B0:D0:F0 which is
- * a reserved device in M1575, but make it easy for
- * most of the scan process.
- */
- hose->first_busno = 0x00;
- hose->last_busno = 0xfe;
-
- pcie_setup_indirect(hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
-
- pci_hose_read_config_word(hose,
-  PCI_BDF(0, 0, 0), PCI_COMMAND, &temp16);
- temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
-    PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
- pci_hose_write_config_word(hose,
-   PCI_BDF(0, 0, 0), PCI_COMMAND, temp16);
-
- pci_hose_write_config_word(hose, PCI_BDF(0, 0, 0), PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose,
-   PCI_BDF(0, 0, 0), PCI_LATENCY_TIMER, 0x80);
-
- pci_hose_read_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
-   &temp32);
- temp32 = (temp32 & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
- pci_hose_write_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
-    temp32);
-
- pcie1->powar1 = 0;
- pcie1->powar2 = 0;
- pcie1->piwar1 = 0;
- pcie1->piwar1 = 0;
-
- pcie1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pcie1->powar1 = 0x8004401c; /* 512M MEM space */
- pcie1->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pcie1->potear1 = 0x00000000;
-
- pcie1->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
- pcie1->powar2 = 0x80088017; /* 16M IO space */
- pcie1->potar2 = 0x00000000;
- pcie1->potear2 = 0x00000000;
-
- pcie1->pitar1 = 0x00000000;
- pcie1->piwbar1 = 0x00000000;
- /* Enable, Prefetch, Local Mem, * Snoop R/W, 2G */
- pcie1->piwar1 = 0xa0f5501e;
-
- pci_set_region(hose->regions + 0,
-       CFG_PCI_MEMORY_BUS,
-       CFG_PCI_MEMORY_PHYS,
-       CFG_PCI_MEMORY_SIZE,
-       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
- pci_set_region(hose->regions + 1,
-       CFG_PCI1_MEM_BASE,
-       CFG_PCI1_MEM_PHYS,
-       CFG_PCI1_MEM_SIZE,
-       PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 2,
-       CFG_PCI1_IO_BASE,
-       CFG_PCI1_IO_PHYS,
-       CFG_PCI1_IO_SIZE,
-       PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
- debug("pcie_mpc86xx_init: last_busno %x\n", hose->last_busno);
- debug("pcie_mpc86xx init: current_busno %x\n ", hose->current_busno);
-
- printf("....PCIE1 scan & enumeration done\n");
-}
-#endif /* CONFIG_PCI */
diff --git a/cpu/mpc86xx/pcie_indirect.c b/cpu/mpc86xx/pcie_indirect.c
deleted file mode 100644
index b00ad76..0000000
--- a/cpu/mpc86xx/pcie_indirect.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (c) Freescale Semiconductor, Inc.
- * 2006. All rights reserved.
- *
- * Jason Jin <[hidden email]>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * partly derived from
- * arch/powerpc/platforms/86xx/mpc86xx_pcie.c
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#define PCI_CFG_OUT out_be32
-#define PEX_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff)
-
-static int
-indirect_read_config_pcie(struct pci_controller *hose,
-  pci_dev_t dev,
-  int offset,
-  int len,
-  u32 *val)
-{
- int bus = PCI_BUS(dev);
-
- volatile unsigned char *cfg_data;
- u32 temp;
-
- PEX_FIX;
- if (bus == 0xff) {
- PCI_CFG_OUT(hose->cfg_addr,
-    dev | (offset & 0xfc) | 0x80000001);
- } else {
- PCI_CFG_OUT(hose->cfg_addr,
-    dev | (offset & 0xfc) | 0x80000000);
- }
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
- cfg_data = hose->cfg_data;
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- switch (len) {
- case 1:
- *val = (temp >> (((offset & 3)) * 8)) & 0xff;
- break;
- case 2:
- *val = (temp >> (((offset & 3)) * 8)) & 0xffff;
- break;
- default:
- *val = temp;
- break;
- }
-
- return 0;
-}
-
-static int
-indirect_write_config_pcie(struct pci_controller *hose,
-   pci_dev_t dev,
-   int offset,
-   int len,
-   u32 val)
-{
- int bus = PCI_BUS(dev);
- volatile unsigned char *cfg_data;
- u32 temp;
-
- PEX_FIX;
- if (bus == 0xff) {
- PCI_CFG_OUT(hose->cfg_addr,
-    dev | (offset & 0xfc) | 0x80000001);
- } else {
- PCI_CFG_OUT(hose->cfg_addr,
-    dev | (offset & 0xfc) | 0x80000000);
- }
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
- cfg_data = hose->cfg_data;
- switch (len) {
- case 1:
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- temp = (temp & ~(0xff << ((offset & 3) * 8))) |
-    (val << ((offset & 3) * 8));
- PEX_FIX;
- out_le32((u32 *) cfg_data, temp);
- break;
- case 2:
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- temp = (temp & ~(0xffff << ((offset & 3) * 8)));
- temp |= (val << ((offset & 3) * 8));
- PEX_FIX;
- out_le32((u32 *) cfg_data, temp);
- break;
- default:
- PEX_FIX;
- out_le32((u32 *) cfg_data, val);
- break;
- }
- PEX_FIX;
- return 0;
-}
-
-static int
-indirect_read_config_byte_pcie(struct pci_controller *hose,
-       pci_dev_t dev,
-       int offset,
-       u8 *val)
-{
- u32 val32;
- indirect_read_config_pcie(hose, dev, offset, 1, &val32);
- *val = (u8) val32;
- return 0;
-}
-
-static int
-indirect_read_config_word_pcie(struct pci_controller *hose,
-       pci_dev_t dev,
-       int offset,
-       u16 *val)
-{
- u32 val32;
- indirect_read_config_pcie(hose, dev, offset, 2, &val32);
- *val = (u16) val32;
- return 0;
-}
-
-static int
-indirect_read_config_dword_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u32 *val)
-{
- return indirect_read_config_pcie(hose, dev, offset, 4, val);
-}
-
-static int
-indirect_write_config_byte_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u8 val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 1, (u32) val);
-}
-
-static int
-indirect_write_config_word_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- unsigned short val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 2, (u32) val);
-}
-
-static int
-indirect_write_config_dword_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u32 val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 4, val);
-}
-
-void
-pcie_setup_indirect(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
-{
- pci_set_ops(hose,
-    indirect_read_config_byte_pcie,
-    indirect_read_config_word_pcie,
-    indirect_read_config_dword_pcie,
-    indirect_write_config_byte_pcie,
-    indirect_write_config_word_pcie,
-    indirect_write_config_dword_pcie);
-
- hose->cfg_addr = (unsigned int *)cfg_addr;
- hose->cfg_data = (unsigned char *)cfg_data;
-}
-
-#endif /* CONFIG_PCI */
diff --git a/drivers/Makefile b/drivers/Makefile
index 48fd4ea..fa2e86f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -52,7 +52,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
   ks8695eth.o \
   pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
   rpx_pcmcia.o \
-  fsl_i2c.o
+  fsl_i2c.o fsl_pci_init.o
 
 SRCS := $(COBJS:.o=.c)
 OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c
new file mode 100644
index 0000000..8a3e39d
--- /dev/null
+++ b/drivers/fsl_pci_init.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+
+#ifdef CONFIG_FSL_PCI_INIT
+
+/*
+ * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
+ *
+ * Initialize controller and call the common driver/pci pci_hose_scan to
+ * scan for bridges and devices.
+ *
+ * Hose fields which need to be pre-initialized by board specific code:
+ *   regions[]
+ *   first_busno
+ *
+ * Fields updated:
+ *   last_busno
+ */
+
+#include <pci.h>
+#include <asm/immap_fsl_pci.h>
+
+void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+
+void pciauto_config_init(struct pci_controller *hose);
+void
+fsl_pci_init(struct pci_controller *hose)
+{
+ u16 temp16;
+ u32 temp32;
+ int busno = hose->first_busno;
+ int neg_link_w, enabled;
+ u16 ltssm;
+ u8 temp8;
+ int r;
+ int bridge;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
+ pci_dev_t dev = PCI_BDF(busno,0,0);
+
+ /* Initialize ATMU registers based on hose regions and flags */
+ volatile pot_t *po=&pci->pot[1]; /* skip 0 */
+ volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */
+
+ for (r=0; r<hose->region_count; r++) {
+ if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
+ pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ pi->piwbear = 0;
+ pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
+ (__ilog2(hose->regions[r].size) - 1);
+ pi++;
+ } else { /* Outbound */
+ po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ po->potear = 0;
+ if (hose->regions[r].flags & PCI_REGION_IO)
+ po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ else
+ po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ po++;
+ }
+ }
+
+ pci_register_hose(hose);
+ pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
+ hose->current_busno = hose->first_busno;
+
+ pci->pedr = 0xffffffff; /* Clear any errors */
+ pci->peer = 0xffffffff; /* Enable Error Interupts */
+ pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
+ temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
+ pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
+
+ pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
+ bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
+
+ if ( bridge ) {
+
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
+ enabled = ltssm >= PCI_LTSSM_L0;
+
+ if (!enabled) {
+ debug("....PCIE link error.  Skipping scan."
+      "LTSSM=0x%02x\n", temp16);
+ hose->last_busno = hose->first_busno;
+ return;
+ }
+
+ pci->pme_msg_det = 0xffffffff;
+ pci->pme_msg_int_en = 0xffffffff;
+#ifdef DEBUG
+ pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
+ neg_link_w = (temp16 & 0x3f0 ) >> 4;
+ debug("...PCIE LTSSM=0x%x, Negotiated link width=%d\n",
+      ltssm, neg_link_w);
+#endif
+ hose->current_busno++; /* Start scan with secondary */
+ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+
+ } else {
+#if 0
+/* done in pci_hose_config_device() */
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
+ temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+#endif
+ }
+
+ /* Call setup to allocate PCSRBAR window */
+ pciauto_setup_device(hose, dev, 1, hose->pci_mem,
+     hose->pci_prefetch, hose->pci_io);
+
+ printf ("               Scanning PCI bus %02x\n", hose->current_busno);
+ hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
+
+ if ( bridge ) { /* update limit regs and subordinate busno */
+ pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
+ }
+
+ /* Clear all error indications */
+
+ if (pci->pme_msg_det && pci->pme_msg_det != 0xffffffff) {
+ debug("pci_fsl_init: pme_msg_det@%x=%x.  Clearing\n",
+ &pci->pme_msg_det, pci->pme_msg_det);
+ pci->pme_msg_det = 0xffffffff;
+ }
+
+ if (pci->pedr) {
+ debug("pci_fsl_init: pedr@%x=%x.  Clearing\n",
+ &pci->pedr, pci->pedr);
+ pci->pedr = 0xffffffff;
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_DSR@%x=%x.  Clearing\n",
+ PCI_DSR, temp16);
+ pci_hose_write_config_word(hose, dev,
+   PCI_DSR, 0xffff);
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_SEC_STATUS@%x=%x.  Clearing\n",
+ PCI_SEC_STATUS, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
+ }
+}
+
+#endif /* CONFIG_FSL_PCI */
diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h
new file mode 100644
index 0000000..bd732b6
--- /dev/null
+++ b/include/asm-ppc/immap_fsl_pci.h
@@ -0,0 +1,150 @@
+/* (C) Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMMAP_85xx_fsl_pci__
+#define __IMMAP_85xx_fsl_pci__
+
+/*
+ * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
+ */
+
+/*
+ * PCI Translation Registers
+ */
+typedef struct pci_outbound_window {
+ u32 potar; /* 0x00 - Address */
+ u32 potear; /* 0x04 - Address Extended */
+ u32 powbar; /* 0x08 - Window Base Address */
+ u32 res1;
+ u32 powar; /* 0x10 - Window Attributes */
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+ u32 res2[3];
+} pot_t;
+
+typedef struct pci_inbound_window {
+ u32 pitar; /* 0x00 - Address */
+ u32 res1;
+ u32 piwbar; /* 0x08 - Window Base Address */
+ u32 piwbear; /* 0x0c - Window Base Address Extended */
+ u32 piwar; /* 0x10 - Window Attributes */
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+ u32 res2[3];
+} pit_t;
+
+/* PCI/PCI Express Registers */
+typedef struct ccsr_pci {
+ u32 cfg_addr; /* 0x000 - PCI Configuration Address Register */
+ u32 cfg_data; /* 0x004 - PCI Configuration Data Register */
+ u32 int_ack; /* 0x008 - PCI Interrupt Acknowledge Register */
+ u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */
+ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */
+ u32 config; /* 0x014 - PCIE CONFIG Register */
+ char res2[8];
+ u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */
+ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
+ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
+ u32 pm_command; /* 0x02c - PCIE PM Command register */
+ char res4[3016]; /*     (- #xbf8 #x30)3016 */
+ u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
+ u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
+
+ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
+ u32 res5[64];
+ pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
+#define PIT3 0
+#define PIT2 1
+#define PIT1 2
+
+#if 0
+ u32 potar0; /* 0xc00 - PCI Outbound Transaction Address Register 0 */
+ u32 potear0; /* 0xc04 - PCI Outbound Translation Extended Address Register 0 */
+ char res5[8];
+ u32 powar0; /* 0xc10 - PCI Outbound Window Attributes Register 0 */
+ char res6[12];
+ u32 potar1; /* 0xc20 - PCI Outbound Transaction Address Register 1 */
+ u32 potear1; /* 0xc24 - PCI Outbound Translation Extended Address Register 1 */
+ u32 powbar1; /* 0xc28 - PCI Outbound Window Base Address Register 1 */
+ char res7[4];
+ u32 powar1; /* 0xc30 - PCI Outbound Window Attributes Register 1 */
+ char res8[12];
+ u32 potar2; /* 0xc40 - PCI Outbound Transaction Address Register 2 */
+ u32 potear2; /* 0xc44 - PCI Outbound Translation Extended Address Register 2 */
+ u32 powbar2; /* 0xc48 - PCI Outbound Window Base Address Register 2 */
+ char res9[4];
+ u32 powar2; /* 0xc50 - PCI Outbound Window Attributes Register 2 */
+ char res10[12];
+ u32 potar3; /* 0xc60 - PCI Outbound Transaction Address Register 3 */
+ u32 potear3; /* 0xc64 - PCI Outbound Translation Extended Address Register 3 */
+ u32 powbar3; /* 0xc68 - PCI Outbound Window Base Address Register 3 */
+ char res11[4];
+ u32 powar3; /* 0xc70 - PCI Outbound Window Attributes Register 3 */
+ char res12[12];
+ u32 potar4; /* 0xc80 - PCI Outbound Transaction Address Register 4 */
+ u32 potear4; /* 0xc84 - PCI Outbound Translation Extended Address Register 4 */
+ u32 powbar4; /* 0xc88 - PCI Outbound Window Base Address Register 4 */
+ char res13[4];
+ u32 powar4; /* 0xc90 - PCI Outbound Window Attributes Register 4 */
+ char res14[268];
+ u32 pitar3; /* 0xda0 - PCI Inbound Translation Address Register 3 */
+ char res15[4];
+ u32 piwbar3; /* 0xda8 - PCI Inbound Window Base Address Register 3 */
+ u32 piwbear3; /* 0xdac - PCI Inbound Window Base Extended Address Register 3 */
+ u32 piwar3; /* 0xdb0 - PCI Inbound Window Attributes Register 3 */
+ char res16[12];
+ u32 pitar2; /* 0xdc0 - PCI Inbound Translation Address Register 2 */
+ char res17[4];
+ u32 piwbar2; /* 0xdc8 - PCI Inbound Window Base Address Register 2 */
+ u32 piwbear2; /* 0xdcc - PCI Inbound Window Base Extended Address Register 2 */
+ u32 piwar2; /* 0xdd0 - PCI Inbound Window Attributes Register 2 */
+ char res18[12];
+ u32 pitar1; /* 0xde0 - PCI Inbound Translation Address Register 1 */
+ char res19[4];
+ u32 piwbar1; /* 0xde8 - PCI Inbound Window Base Address Register 1 */
+ char res20[4];
+ u32 piwar1; /* 0xdf0 - PCI Inbound Window Attributes Register 1 */
+ char res21[12];
+#endif
+ u32 pedr; /* 0xe00 - PCI Error Detect Register */
+ u32 pecdr; /* 0xe04 - PCI Error Capture Disable Register */
+ u32 peer; /* 0xe08 - PCI Error Interrupt Enable Register */
+ u32 peattrcr; /* 0xe0c - PCI Error Attributes Capture Register */
+ u32 peaddrcr; /* 0xe10 - PCI Error Address Capture Register */
+/* u32 perr_disr * 0xe10 - PCIE Erorr Disable Register */
+ u32 peextaddrcr; /* 0xe14 - PCI Error Extended Address Capture Register */
+ u32 pedlcr; /* 0xe18 - PCI Error Data Low Capture Register */
+ u32 pedhcr; /* 0xe1c - PCI Error Error Data High Capture Register */
+ u32 gas_timr; /* 0xe20 - PCI Gasket Timer Register */
+/* u32 perr_cap_stat; * 0xe20 - PCIE Error Capture Status Register */
+ char res22[4];
+ u32 perr_cap0; /* 0xe28 - PCIE Error Capture Register 0 */
+ u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
+ u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
+ u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
+ char res23[456]; /*     (- #x1000 #xe38) 456 */
+} ccsr_fsl_pci_t;
+
+#endif /*__IMMAP_fsl_pci__*/
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 808c19f..8dffa6e 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -46,8 +46,10 @@
 
 #define CFG_RESET_ADDRESS    0xfff00100
 
-/*#undef CONFIG_PCI*/
-#define CONFIG_PCI
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
+#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
 
 #define CONFIG_TSEC_ENET /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -93,6 +95,9 @@
 #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
 #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
 
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+
 /*
  * DDR Setup
  */
@@ -296,9 +301,9 @@
 #define CFG_PCI1_MEM_BASE 0x80000000
 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
 
 /* PCI view of System Memory */
 #define CFG_PCI_MEMORY_BUS      0x00000000
@@ -311,10 +316,10 @@
 
 #define CFG_PCI2_MEM_BASE 0xa0000000
 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -396,20 +401,20 @@
  * 0xa000_0000  512M   PCI-Express 2 Memory
  * Changed it for operating from 0xd0000000
  */
-#define CFG_DBAT1L      ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT1L      ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U      (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L      (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CFG_IBAT1U      CFG_DBAT1U
 
 /*
  * BAT2         512M   Cache-inhibited, guarded
  * 0xc000_0000  512M   RapidIO Memory
  */
-#define CFG_DBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT2L      (CFG_RIO_MEM_PHYS | BATL_PP_RW \
  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U      (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CFG_IBAT2U      CFG_DBAT2U
 
 /*
@@ -428,10 +433,10 @@
  * 0xe300_0000  16M    PCI-Express 2 I/0
  *    Note that this is at 0xe0000000
  */
-#define CFG_DBAT4L      ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+#define CFG_DBAT4L      ( CFG_PCI1_IO_PHYS | BATL_PP_RW \
  | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U      (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L      (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CFG_IBAT4U      CFG_DBAT4U
 
 /*
diff --git a/include/pci.h b/include/pci.h
index 7c9a0e3..8e5dacc 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -302,6 +302,12 @@
 #define PCI_MAX_PCI_DEVICES 32
 #define PCI_MAX_PCI_FUNCTIONS 8
 
+#define PCI_DCR 0x54    /* PCIe Device Control Register */
+#define PCI_DSR 0x56    /* PCIe Device Status Register */
+#define PCI_LSR 0x5e    /* PCIe Link Status Register */
+#define PCI_LTSSM 0x404   /* PCIe Link Training, Status State Machine */
+#define  PCI_LTSSM_L0 0x16    /* L0 state */
+
 /* Include the ID list */
 
 #include <pci_ids.h>
--
1.5.0.3




-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
U-Boot-Users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [PATCH] Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.

Jon Loeliger
On Wed, 2007-07-18 at 12:20, Jon Loeliger wrote:

> From: Ed Swarthout <[hidden email]>
>
> All of the PCI/PCI-Express driver and initialization code that
> was in the MPC8641HPCN port has now been moved into the common
> drivers/fsl_pci_init.c.  In a subsequent patch, this will be
> utilized by the 85xx ports as well.
>
> Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
>
> Also enable the second PCI-Express controller on 8641
> by getting its BATS and CFG_ setup right.
>
> Signed-off-by: Ed Swarthout <[hidden email]>
> Signed-off-by: Zhang Wei <[hidden email]>
> Signed-off-by: Jon Loeliger <[hidden email]>
> ---
>
> Wolfgang,
>
> Please apply this to the testing repository as it depends on
> my previous PCI/PCI-E changes already applied there.  I have
> built and tested this on the 8641 from u-boot-testing.
>
> Thanks,
> jdl
>
>
>  board/mpc8641hpcn/mpc8641hpcn.c |  161 ++++++++++++++++++++++++-------
>  board/mpc8641hpcn/u-boot.lds    |    1 -
>  cpu/mpc86xx/Makefile            |    3 +-
>  cpu/mpc86xx/pci.c               |  146 ----------------------------
>  cpu/mpc86xx/pcie_indirect.c     |  199 ---------------------------------------
>  drivers/Makefile                |    2 +-
>  drivers/fsl_pci_init.c          |  176 ++++++++++++++++++++++++++++++++++
>  include/asm-ppc/immap_fsl_pci.h |  150 +++++++++++++++++++++++++++++
>  include/configs/MPC8641HPCN.h   |   41 +++++----
>  include/pci.h                   |    6 +
>  10 files changed, 482 insertions(+), 403 deletions(-)
>  delete mode 100644 cpu/mpc86xx/pci.c
>  delete mode 100644 cpu/mpc86xx/pcie_indirect.c
>  create mode 100644 drivers/fsl_pci_init.c
>  create mode 100644 include/asm-ppc/immap_fsl_pci.h


Wolfgang,

I will rebase this patch to current top of u-boot-testing.git and
repost it for you.  It will take into account the minor cleanups
that you recently posted for the 8641 HPCN board.  I would send
these via the -mpc86xx repo, except that they are dependent upon
the patches already in the -testing repository!

There is a follow-up 85xx PCI patch series that I will
press Andy Fleming into posting as well has his followup
TSEC cleanup patches!

Thanks,
jdl



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
U-Boot-Users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Loading...