[GIT PULL v2] TI changes for v2020.10-rc3

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

[GIT PULL v2] TI changes for v2020.10-rc3

Lokesh Vutla
Hi Tom,
        Please find the pull request for v2020.10-rc3 containing TI specific
changes. This should have been sent for rc2 but delayed due to some
comments in the last minute. Please look at the PR description for the
details on the PR. Also tag message is updated with details.

Changes since v1:
- Dropped an invalid commit
- Updated Tag message

Travis-CI build: https://travis-ci.org/github/lokeshvutla/u-boot/builds/716955604

The following changes since commit c045207f96f7f7ae8c7f1341111a6010e636176b:

  Prepare v2020.10-rc2 (2020-08-10 16:10:09 -0400)

are available in the Git repository at:

  https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/ti-v2020.10-rc3

for you to fetch changes up to db6451ec0e8483f76f3364293d48e86249c52322:

  arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port (2020-08-11 20:34:46 +0530)

----------------------------------------------------------------
- Added support for J7200 evm
- DM_ETH and DM_USB migrations for omap3
- USB DFU and mass storage support for AM65x evm
- RTI watchdog support for K3 devices
- Fix an issue with L3 cache on K3 devices

----------------------------------------------------------------
Andrew F. Davis (1):
      arm: mach-k3: Clean non-coherent lines out of L3 cache

Dave Gerlach (1):
      arm: dts: k3-j7200: Add R5 specific dts support

Derald D. Woods (1):
      ARM: omap3: evm: Complete DM_ETH and DM_USB migrations

Faiz Abbas (14):
      mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value
      spl: usb: Create an API spl_usb_load()
      spl: usb: Only init usb once
      armv7R: K3: am654: Use full malloc in SPL both pre and post reloc
      arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB
      arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config
      arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
      arm: mach-k3: am6_init: Add support for USB boot mode
      arm: dts: k3-am654-r5-base-board: Add USB0 nodes
      arm: dts: k3-am654-base-board: Add support for USB0 in SPL
      configs: am65x_evm: Add support for DFU related configs
      configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes
      configs: Add defconfig for USB DFU bootmode
      configs: Add new config for supporting USB mass storage boot

Jan Kiszka (2):
      watchdog: Add support for K3 RTI watchdog
      arm: dts: k3: Add RTI watchdogs

Jean-Jacques Hiblot (1):
      arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled

Kishon Vijay Abraham I (1):
      soc: soc_ti_k3: Add device identification for J7200 SoC

Lokesh Vutla (15):
      board: ti: board_detect: Add stub functions for EEPROM detection apis
      board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined
      arm: mach-k3: Move mmr_unlock to a common location
      arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
      arm: mach-k3: j721e: Add detection for j721e
      arm: mach-k3: j721e: Fix unlocking control module registers
      arm: mach-k3: j7200: Add support for SOC detection
      arm: mach-k3: j7200: Add support for storing extended boot info from ROM
      arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
      board: ti: j7200: Introduce support for j7200 build targets
      board: ti: j7200: Add board detection support for j7200
      ram: k3-j721e: Relax version checks for memory controller
      arm: dts: k3-j7200: Add dts support
      configs: j7200_evm_r5: Add initial support
      configs: j7200_evm_a72: Add Initial support

Suman Anna (4):
      arm: dts: k3-am65: Fix interconnect node names
      arm: dts: k3-j721e: Fix interconnect node names
      board: ti: am65x: Update fdt fixup logic for interconnect nodes
      board: ti: j721e: Update fdt fixup logic for interconnect nodes

Vignesh Raghavendra (6):
      arm: dts: k3-j7200: Add USB related DT entries
      board: ti: j721e: Add support for HyperFlash detection
      ARM: dts: k3-j7200: Add wkup gpio node
      ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes
      ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support
      arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port

 arch/arm/dts/Makefile                              |    4 +-
 arch/arm/dts/k3-am65-mcu.dtsi                      |    9 +
 arch/arm/dts/k3-am65.dtsi                          |    6 +-
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi       |   27 +
 arch/arm/dts/k3-am654-r5-base-board.dts            |   35 +
 .../arm/dts/k3-j7200-common-proc-board-u-boot.dtsi |  133 ++
 arch/arm/dts/k3-j7200-common-proc-board.dts        |  195 ++
 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi        | 2195 ++++++++++++++++++++
 arch/arm/dts/k3-j7200-main.dtsi                    |  343 +++
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi              |  272 +++
 arch/arm/dts/k3-j7200-r5-common-proc-board.dts     |  217 ++
 arch/arm/dts/k3-j7200-som-p0.dtsi                  |   62 +
 arch/arm/dts/k3-j7200.dtsi                         |  177 ++
 arch/arm/dts/k3-j721e-main.dtsi                    |   18 +
 arch/arm/dts/k3-j721e.dtsi                         |    4 +-
 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi            |   10 +
 arch/arm/dts/omap3-evm-u-boot.dtsi                 |   10 +
 arch/arm/mach-k3/Makefile                          |    1 +
 arch/arm/mach-k3/am6_init.c                        |   80 +-
 arch/arm/mach-k3/cache.S                           |   24 +
 arch/arm/mach-k3/common.c                          |   38 +
 arch/arm/mach-k3/common.h                          |    6 +
 arch/arm/mach-k3/config.mk                         |    8 +-
 arch/arm/mach-k3/include/mach/am6_hardware.h       |    2 +
 arch/arm/mach-k3/include/mach/am6_spl.h            |    3 +-
 arch/arm/mach-k3/include/mach/hardware.h           |    8 +
 arch/arm/mach-k3/include/mach/j721e_hardware.h     |    3 +
 arch/arm/mach-k3/include/mach/sys_proto.h          |    3 +
 arch/arm/mach-k3/include/mach/sysfw-loader.h       |    4 +-
 arch/arm/mach-k3/j721e_init.c                      |   30 +-
 arch/arm/mach-k3/sysfw-loader.c                    |   67 +-
 arch/arm/mach-omap2/omap3/Kconfig                  |    3 +
 board/ti/am65x/MAINTAINERS                         |    2 +
 board/ti/am65x/evm.c                               |   10 +-
 board/ti/common/board_detect.h                     |   13 +
 board/ti/evm/evm.c                                 |   82 +-
 board/ti/j721e/Kconfig                             |   53 +
 board/ti/j721e/MAINTAINERS                         |    2 +
 board/ti/j721e/evm.c                               |   56 +-
 common/spl/spl_usb.c                               |   31 +-
 configs/am65x_evm_a53_defconfig                    |   10 +
 configs/am65x_evm_r5_usbdfu_defconfig              |  120 ++
 configs/am65x_evm_r5_usbmsc_defconfig              |  119 ++
 configs/j7200_evm_a72_defconfig                    |  173 ++
 configs/j7200_evm_r5_defconfig                     |  130 ++
 configs/omap3_evm_defconfig                        |   14 +-
 drivers/mmc/am654_sdhci.c                          |    2 +-
 drivers/ram/k3-j721e/lpddr4.c                      |   16 +-
 drivers/soc/soc_ti_k3.c                            |    4 +
 drivers/watchdog/Kconfig                           |    7 +
 drivers/watchdog/Makefile                          |    1 +
 drivers/watchdog/rti_wdt.c                         |  123 ++
 include/configs/am65x_evm.h                        |    6 +-
 include/configs/j721e_evm.h                        |    4 +-
 include/spl.h                                      |   14 +
 55 files changed, 4821 insertions(+), 168 deletions(-)
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
 create mode 100644 arch/arm/dts/k3-j7200.dtsi
 create mode 100644 arch/arm/mach-k3/cache.S
 create mode 100644 configs/am65x_evm_r5_usbdfu_defconfig
 create mode 100644 configs/am65x_evm_r5_usbmsc_defconfig
 create mode 100644 configs/j7200_evm_a72_defconfig
 create mode 100644 configs/j7200_evm_r5_defconfig
 create mode 100644 drivers/watchdog/rti_wdt.c
--
2.23.0

Reply | Threaded
Open this post in threaded view
|

Re: [GIT PULL v2] TI changes for v2020.10-rc3

Tom Rini-4
On Wed, Aug 12, 2020 at 08:02:45AM +0530, Lokesh Vutla wrote:

> Hi Tom,
> Please find the pull request for v2020.10-rc3 containing TI specific
> changes. This should have been sent for rc2 but delayed due to some
> comments in the last minute. Please look at the PR description for the
> details on the PR. Also tag message is updated with details.
>
> Changes since v1:
> - Dropped an invalid commit
> - Updated Tag message
>
> Travis-CI build: https://travis-ci.org/github/lokeshvutla/u-boot/builds/716955604
>
> The following changes since commit c045207f96f7f7ae8c7f1341111a6010e636176b:
>
>   Prepare v2020.10-rc2 (2020-08-10 16:10:09 -0400)
>
> are available in the Git repository at:
>
>   https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/ti-v2020.10-rc3
>
> for you to fetch changes up to db6451ec0e8483f76f3364293d48e86249c52322:
>
>   arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port (2020-08-11 20:34:46 +0530)
>
Applied to u-boot/master, thanks!

--
Tom

signature.asc (673 bytes) Download Attachment